ATI drivers problem

[Sulimo]

i had updated to last ATI drivers, but now i can not play Regnum :facepalm2:

my system is:

ubuntu 10.10 64 bits
ATI radeon 3100

====>> glxinfo | grep rendering OR fglrxinfo =

X Error of failed request: BadRequest (invalid request code or no such operation)
Major opcode of failed request: 136 (GLX)
Minor opcode of failed request: 19 (X_GLXQueryServerString)
Serial number of failed request: 18
Current serial number in output stream: 18


Excuse me for my bad english...

[Arafails]

Your GLX is b0rked. Can you post the output of grep '(\(WW\|EE\|!!\))' /var/log/Xorg.0.log
(I'd suggest switching to the open source driver, but still no S3TC lovin' so it won't run RO).

[Sulimo]

xorg info:


++++++Log de Xorg+++++
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) Falling back to old probe method for fglrx
(WW) Unsupported ASIC ID 1002:688D:0000:0000 in control file
(WW) Unsupported ASIC ID 1002:688D:0000:0000 in control file
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:17:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:18:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:19:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:2) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:3) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:4) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@0:20:5) found
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(EE) fglrx(0): XMM failed to open CMMQS connection.
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used

Other Info:


Informe generado el día 11/02/2010
++++++CPU+++++
Modelo: (model)
AMD Phenom(tm) 8450 Triple-Core Processor
AMD Phenom(tm) 8450 Triple-Core Processor
AMD Phenom(tm) 8450 Triple-Core Processor
MHz:
2100.066
2100.066
2100.066
Cache:
512 KB
512 KB
512 KB

++++++Distro+++++
Kernel: Linux eskape 2.6.32-25-generic #45-Ubuntu SMP Sat Oct 16 19:52:42 UTC 2010 x86_64 GNU/Linux
Arquitectura: x86_64
Num. Ver..: squeeze/sid
Carga & uptime: 11:30:09 up 32 min, 2 users, load average: 1.58, 0.70, 0.49
Beryl: No se ejecuta (don't run)


++++++Placa de video+++++
Hardware: 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon 3100 Graphics
Aceleracion (Direct Rendering): Sin info
OpenGL:
Sin info
Extensiones S3TC: No habilitadas

++++++Xorg.conf++++++
Load: No se detectan secciones Load

Drivers: VendorName fglrx

++++++RAM+++++
Memoria total: 3800164 kB
Memoria libre: 2683648 kB

++++++sensores+++++
No hay sensores

[Arafails]

(WW) fglrx(0): Kernel Module version does *not* match driver.

Suggests you did not yet rebuild the kernel module for acceleration. Have you noticed your desktop being irrationally slow?

Did you install with a package or download direct from AMD?

[Sulimo]

Hello, my desktop is "normal", and I installed directly from AMD.
but after ..

1 = delete the drivers (cd /usr/share/ati THEN sudo sh ./fglrx-uninstall.sh)
2 = sudo sh ./ati-driver.run --buildpkg Ubuntu/lucid

Created directory fglrx-install.8ALgUp
Verifying archive integrity... All good.
Uncompressing ATI Catalyst(TM) Proprietary Driver-8.783............................................. .................................................. .................................................. .................................................. ................................
===============================================
ATI Technologies Catalyst(TM) Proprietary Driver Installer/Packager
===============================================
Generating package: Ubuntu/lucid
Package /home/pedro/tempo/fglrx_8.783-0ubuntu1_amd64.deb has been successfully generated
Package /home/pedro/tempo/fglrx-dev_8.783-0ubuntu1_amd64.deb has been successfully generated
Package /home/pedro/tempo/fglrx-amdcccle_8.783-0ubuntu1_amd64.deb has been successfully generated
Package /home/pedro/tempo/fglrx-modaliases_8.783-0ubuntu1_amd64.deb has been successfully generated
Removing temporary directory: fglrx-install.8ALgUp

3 = grep '(\(WW\|EE\|!!\))' /var/log/Xorg.0.log

(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(WW) RADEON(0): Direct rendering disabled
(EE) RADEON(0): Acceleration initialization failed
(EE) GLX error: Can not get required symbols.

[Arafails]

What happens if you do sudo dkms build -m fglrx -v 8.783

[Sulimo]

sudo dkms build -m fglrx -v 8.783

Error! This module/version has already been built on: 2.6.32-25-generic
Directory: /var/lib/dkms/fglrx/8.783/2.6.32-25-generic/x86_64
already exists. Use the dkms remove function before trying to build again.

[Arafails]

Di you reboot since installing, or at least stop gdm, reload the module, and start gdm again?

[Sulimo]

I think, I should reinstall the system :sifflote:

[OpperVaagheid]

I am not such a linux geek as ara is =] But... can't envy just help you?
Envy will just pick the drivers you need?
Prolly my answer is way to nubbish and wont help a shit ^^

[Arafails]

envy hasn't been good for ati drivers for ages. It's never worked at all for me.

kalima, having built all those package files, did you install them with dpkg?

[Sulimo]

Thanks arafails, resolved problem :bananajoy: steps:
1 download last ATI drivers
2 apt-get update
3 sudo bash ati-driver.run --buildpkg Ubuntu/lucyd
4 dpkg -i fglrx-amdcccle_8.783-0ubuntu1_amd64.deb
dpkg -i fglrx-dev_8.783-0ubuntu1_amd64.deb
dpkg -i fglrx-modaliases_8.783-0ubuntu1_amd64.deb
5 gedit /etc/X11/xorg.conf
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
EndSection
6 reboot system (glxinfo | grep direct = YES .....)
7 to play RO

Thanks also to ===>>> http://www.ubuntu-es.org/index.php?q=node/67826