Two computers + ADSL Router + Regnum = Help!

Ironfoot · 07-09-2008, 03:49 PM

I have 2 computers that share ADSL connection (512/128) in my room. On my primary Regnum is running just fine, but when i dl and install Regnum client on the second one, its stuck at the loading screen...when u have to accept licence agreement.
Any suggestions on what should i do? Its not IP adress conflict, Internet works on both comps. Both comps have WinXP SP 2..

gamemod · 07-09-2008, 05:35 PM

Hi Ironfoot,

Do you have NAT enabled on your router? Which is its brand and model?

Regards.

Ironfoot · 07-09-2008, 06:06 PM

D-Link DSL-524T
Ahem...i dont know what NAT is...explain like you would do to a noob

please.
Thanks!

gamemod · 07-09-2008, 06:20 PM

Quote:

Originally Posted by Ironfoot

D-Link DSL-524T
Ahem...i dont know what NAT is...explain like you would do to a noob

please.
Thanks!

Well, you have to go to the Router Settings that can be accessed by putting in your navigator its IP address. You login with the proper user and pass.

It is important to check that the DHCP server is enabled and no manual IPs configured in both PCs. First make sure about this and then we'll continue.

Regards.

Ironfoot · 07-09-2008, 06:52 PM

Ok i logged in router settings, DHCP is enabled, and on both PC's is "Obtain IP automatically' checked (under LAN dialog window).
And ofcourse firewall is off at both PC's.

Ironfoot · 07-09-2008, 06:54 PM

I browsed the options in router, and NAT is enabled (even tough i dont know what that is).

Tyr · 07-09-2008, 06:53 PM

Quote:

Originally Posted by Ironfoot

I have 2 computers that share ADSL connection (512/128) in my room. On my primary Regnum is running just fine, but when i dl and install Regnum client on the second one, its stuck at the loading screen...when u have to accept licence agreement.
Any suggestions on what should i do? Its not IP adress conflict, Internet works on both comps. Both comps have WinXP SP 2..

A better question is does the 2nd pc work with the game when the 1st pc is powered off? If does run the game then you could have a NAT problem. If you can't then more likely you have a problem with that 2nd pc running the game.

(N)etwork (A)ddress (T)ranslation is the process of modifying network address while in transit across a routing device for the purpose of remapping a given address into another. So it will take the IP address (i.e. 192.168.0.1) and changes it to (in most cases for home networks) the public IP address of your router.

Ironfoot · 07-09-2008, 07:06 PM

Quote:

Originally Posted by Tyr

A better question is does the 2nd pc work with the game when the 1st pc is powered off? If does run the game then you could have a NAT problem. If you can't then more likely you have a problem with that 2nd pc running the game.

The pc's are independent.. But i tried turning the 1st off, and game launcher is still stuck at "Loading..."
This second pc's hardware is enough to run regnum without problems...I played it before on it, worked fine.
See, not that simple..Any ideas?

gamemod · 07-09-2008, 07:24 PM

I still need to know if the second PC is getting its IP address by DHCP (automatic) or manual input.

Regards.

Comp · 07-09-2008, 07:50 PM

If this is windows....

Go to Start -> RUN
Type in cmd
Type in ipconfig
Post what u see

07-09-2008, 03:49 PM	#1
Ironfoot Initiate Join Date: May 2007 Location: Serbia Posts: 143	Two computers + ADSL Router + Regnum = Help! I have 2 computers that share ADSL connection (512/128) in my room. On my primary Regnum is running just fine, but when i dl and install Regnum client on the second one, its stuck at the loading screen...when u have to accept licence agreement. Any suggestions on what should i do? Its not IP adress conflict, Internet works on both comps. Both comps have WinXP SP 2.. __________________ Are you GREEN for the envy?, RED for the hatred?. Don't worry, not all of us have the blood BLUE!. "ALSIUS, A FEW, BUT GOOD".

07-09-2008, 05:35 PM	#2
gamemod NGD·Studios Join Date: May 2008 Location: NGD Studios Posts: 508	Hi Ironfoot, Do you have NAT enabled on your router? Which is its brand and model? Regards. __________________ gamemod - ngd Studios

07-09-2008, 06:06 PM	#3
Ironfoot Initiate Join Date: May 2007 Location: Serbia Posts: 143	D-Link DSL-524T Ahem...i dont know what NAT is...explain like you would do to a noob please. Thanks! __________________ Are you GREEN for the envy?, RED for the hatred?. Don't worry, not all of us have the blood BLUE!. "ALSIUS, A FEW, BUT GOOD".

07-09-2008, 06:52 PM	#5
Ironfoot Initiate Join Date: May 2007 Location: Serbia Posts: 143	Ok i logged in router settings, DHCP is enabled, and on both PC's is "Obtain IP automatically' checked (under LAN dialog window). And ofcourse firewall is off at both PC's. __________________ Are you GREEN for the envy?, RED for the hatred?. Don't worry, not all of us have the blood BLUE!. "ALSIUS, A FEW, BUT GOOD".

07-09-2008, 06:54 PM	#6
Ironfoot Initiate Join Date: May 2007 Location: Serbia Posts: 143	I browsed the options in router, and NAT is enabled (even tough i dont know what that is). __________________ Are you GREEN for the envy?, RED for the hatred?. Don't worry, not all of us have the blood BLUE!. "ALSIUS, A FEW, BUT GOOD".

07-09-2008, 07:24 PM	#9
gamemod NGD·Studios Join Date: May 2008 Location: NGD Studios Posts: 508	I still need to know if the second PC is getting its IP address by DHCP (automatic) or manual input. Regards. __________________ gamemod - ngd Studios

07-09-2008, 07:50 PM	#10
Comp Count Join Date: Jun 2007 Location: Jippy's Mom's House Posts: 1,286	If this is windows.... Go to Start -> RUN Type in cmd Type in ipconfig Post what u see __________________ Compost (60 Hunter) Alsius Compoundious (Dead and gone...)

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode