10-22-2007, 05:25 PM | #41 |
Pledge
Join Date: Oct 2007
Posts: 26
|
Here you go, these settings were reached by using the game's auto detect feature:
Code:
1024x768x32 fullscreen update all new resources at once enable sound enable music detected GPU GeForce 6800/AGP/SSE2 anisotropic filter 1x antialiasing 1X general custom terrain detrail high terrain quality very high water quality high texture quality high veiw distance high terain texture high quality post process weather FXs Particle FXs Lighting FXs autodetect (All above settings were auto detected by the game) fps 3-4 cpu 7% max server 252ms |
10-23-2007, 05:01 AM | #42 |
Pledge
Join Date: Oct 2007
Posts: 13
|
So you corrected your direct rendering problem? If you have not corrected that then you still have a problem with your nvidia drivers. Also, do not enable dri with nvidia. It is not needed for nvidia and nvidia specifically requires it disabled in their documentation. I am playing regnum fine with it disabled. There is a reason why you are not getting direct rendering (if you still are not getting it.)
If direct rendering is still "no" then please post the following and I will try to help: output from 'cat /proc/driver/nvidia/cards/0' output from 'cat /proc/interrupts' Also, post your xorg.conf. Getting direct rendering enabled is going to make any opengl application run better on your system. The 6800 is a very decent card and you should get the performance you can out of it. EDIT: I noticed now that you said direct rendering is enabled. Don't worry about the dri though. You don't want nor need it. |
10-23-2007, 05:10 AM | #43 |
Pledge
Join Date: Oct 2007
Posts: 26
|
Actually, heh, I figured out why it was so bad, I had post proccess selected. my 6800 has always had a very hard time with antialiasing and anisotropic filtering, I turn OSA on in blender 3D and it takes atleast twice as long to render an image. So I turned it off and now I average about 35 fps, and I say that's good.
|
10-23-2007, 05:14 AM | #44 |
Pledge
Join Date: Oct 2007
Posts: 26
|
But here is what you wanted anyway:
Code:
Model: GeForce 6800 IRQ: 11 Video BIOS: 05.40.02.12.61 Card Type: AGP DMA Size: 32 bits DMA Mask: 0xffffffff Bus Location: 01.00.0 Code:
CPU0 0: 5188757 XT-PIC timer 1: 29411 XT-PIC i8042 2: 0 XT-PIC cascade 5: 205851 XT-PIC ohci1394, eth0 8: 0 XT-PIC rtc 9: 0 XT-PIC acpi 10: 50938 XT-PIC libata, EMU10K1 11: 1216072 XT-PIC libata, ohci_hcd:usb1, ohci_hcd:usb2, ehci_hcd:usb3, nvidia 12: 653750 XT-PIC i8042 14: 206195 XT-PIC ide0 15: 369176 XT-PIC ide1 NMI: 20036 LOC: 5188970 ERR: 8 MIS: 0 Code:
Section "Module" Load "dbe" Load "type1" Load "freetype" Load "extmod" Load "glx" Load "v4l" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "on" EndSection Section "InputDevice" Driver "kbd" Identifier "Keyboard[0]" Option "Protocol" "Standard" Option "XkbLayout" "us" Option "XkbModel" "pc104" Option "XkbRules" "xfree86" EndSection Section "InputDevice" Driver "mouse" Identifier "Mouse[1]" Option "Buttons" "12" Option "Device" "/dev/input/mice" Option "Name" "PS2++ Logitech MX Mouse" Option "Protocol" "explorerps/2" Option "Vendor" "Sysp" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Option "CalcAlgorithm" "XServerPool" DisplaySize 376 301 HorizSync 30-83 Identifier "Monitor[0]" ModelName "VIEWSONIC VX900-2" Option "DPMS" VendorName "VSC" VertRefresh 43-75 UseModes "Modes[0]" EndSection Section "Modes" Identifier "Modes[0]" Modeline "1280x1024" 106.97 1280 1360 1496 1712 1024 1025 1028 1059 Modeline "1280x1024" 87.75 1280 1328 1360 1440 1024 1027 1034 1053 +HSync -Vsync Modeline "1280x960" 107.32 1280 1360 1496 1712 960 961 964 995 Modeline "1280x960" 88.25 1280 1328 1360 1440 960 963 967 989 +HSync -Vsync Modeline "1024x768" 81.80 1024 1080 1192 1360 768 769 772 802 Modeline "1024x768" 76.16 1024 1080 1192 1360 768 769 772 800 Modeline "1024x768" 69.71 1024 1080 1184 1344 768 769 772 798 Modeline "1024x768" 69.50 1024 1072 1104 1184 768 771 775 796 +HSync -Vsync Modeline "1024x768" 64.11 1024 1080 1184 1344 768 769 772 795 Modeline "800x600" 48.91 800 840 920 1040 600 601 604 627 Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 Modeline "800x600" 44.00 800 848 880 960 600 603 607 622 +HSync -Vsync Modeline "800x600" 42.11 800 840 920 1040 600 601 604 623 Modeline "800x600" 38.22 800 832 912 1024 600 601 604 622 EndSection Section "Device" BoardName "GeForce 6800" BusID "1:0:0" Driver "nvidia" Identifier "Device[0]" VendorName "NVidia" EndSection Section "Screen" DefaultDepth 24 SubSection "Display" Depth 15 Modes "1280x1024" "1280x960" "1024x768" "800x600" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1280x960" "1024x768" "800x600" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1280x960" "1024x768" "800x600" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1280x960" "1024x768" "800x600" EndSubSection Device "Device[0]" Identifier "Screen[0]" Monitor "Monitor[0]" EndSection Section "ServerLayout" Identifier "Layout[all]" InputDevice "Keyboard[0]" "CoreKeyboard" InputDevice "Mouse[1]" "CorePointer" Screen "Screen[0]" EndSection Section "DRI" Group "video" Mode 0660 EndSection |
10-23-2007, 08:19 AM | #45 |
Duke
Join Date: Jan 2007
Posts: 3,939
|
Add the line Load "dri" and try again
maybe with nvidia isnt necessary, but with ati yes, then try with it again
__________________
"Nunca un científico ha quemado a un religioso por afirmar a Dios sin pruebas". Manuel Toharia "uno empieza a darse cuenta que eso de no hacer ejercicio, comer y beber como si fuese la ultima cena y mantener la figura ya no existe...". Maryan |
10-23-2007, 01:39 PM | #46 | |
Initiate
Join Date: Sep 2007
Location: Paddo's plukken
Posts: 149
|
Quote:
nvidia even tells you to disable it in their readme
__________________
We'll force you to be nice to each other. Kill you, before you kill each other. Violent pacification! |
|
10-23-2007, 02:51 PM | #47 | |
Pledge
Join Date: Oct 2007
Posts: 13
|
Quote:
|
|
10-24-2007, 12:12 AM | #48 |
Pledge
Join Date: Oct 2007
Posts: 26
|
Alright, I enable APIC, and here are the results:
Code:
CPU0 0: 87308 IO-APIC-edge timer 1: 601 IO-APIC-edge i8042 8: 0 IO-APIC-edge rtc 9: 0 IO-APIC-level acpi 12: 36532 IO-APIC-edge i8042 14: 36387 IO-APIC-edge ide0 15: 5720 IO-APIC-edge ide1 177: 5599 IO-APIC-level libata, ehci_hcd:usb1 185: 18 IO-APIC-level libata, ohci_hcd:usb2 193: 31408 IO-APIC-level ohci_hcd:usb3, eth1 201: 24780 IO-APIC-level eth0, nvidia 209: 3 IO-APIC-level ohci1394 217: 1990 IO-APIC-level EMU10K1 NMI: 224 LOC: 87214 ERR: 0 MIS: 0 NOTE: there is no noticeable performance difference. Last edited by Nysomin; 10-24-2007 at 12:25 AM. |
10-24-2007, 12:52 AM | #49 |
Pledge
Join Date: Oct 2007
Posts: 13
|
Yeah... sharing with the ethernet is not any better and, depending on what you plug into usb, can be even worse. I would try to get around it while keeping APIC enabled though. Do you have "Plug and Play OS" enabled in the bios? You might true switching it off and on to see how your irq's get assigned between the two. You may find one setting beneficial over the other.
|
10-24-2007, 02:16 AM | #50 |
Pledge
Join Date: Oct 2007
Posts: 26
|
The only USB device I have plugged in is my printer, and I'm actaully using eth1 for my internet connection(eth0 isn't being used for anything, it was just a backup) so I'm guessing I won't have any major problems. But I am getting a 3-5 fps improvement now, so I guess it's ok. Still can't run post process past 17 fps(and that's with all the other settings off or as low as they can get, to include resolution).
|
|
|