NT and Intel

imefisto_foro · 02-23-2010, 06:23 PM

Hi all.

I'm having problems to play and maybe it's about my system and/or specs (I'm getting 7/9fps in fixed mode):

Genuine Intel(R) CPU T2080 @ 1.73GHz (Duo)
1GB Ram
Video: Intel 945

Who plays Regnum with Intel in Linux? Which versions of kernel, xorg, intel driver and mesa are you using?

Thanks in advance!

Myxir · 02-25-2010, 09:58 PM

The ng3d update improved the performance by giving more load to GPU than before. That means for users with a weaker graphic card the update decreased the game performance. Especially the Intel chips were hurt by this.
There is an option hardware skinning that allows to pass a bit of load between GPU and CPU. But i don't know in which state it gives load to CPU. You might try that. Fixed pipeline and minimum settings is all you can do, I think :/

imefisto_foro · 02-26-2010, 02:28 AM

Quote:

Originally Posted by Myxir

The ng3d update improved the performance by giving more load to GPU than before. That means for users with a weaker graphic card the update decreased the game performance. Especially the Intel chips were hurt by this.
There is an option hardware skinning that allows to pass a bit of load between GPU and CPU. But i don't know in which state it gives load to CPU. You might try that. Fixed pipeline and minimum settings is all you can do, I think :/

thanks!. I've reading about hardware skinning. I'found this, related:

The HARDWARE SKINNING option in the video settings can be used to let your video card (GPU) handle the skinning instead of your computer's processor(s) (CPU).

http://forums.firingsquad.com/t5/Gam...ing/m-p/255096

And in the game.cfg for regnum:

Code:

vg_enable_hw_skinning = 0

Too bad, it appears I have already disabled hardware skinning and still getting low fps.

I'll continue investigating. Thank you very much!

Any comments about this will be very welcomed

Evangeline · 04-09-2010, 09:15 PM

if u find a solution pls post

imefisto_foro · 04-09-2010, 10:47 PM

Quote:

Originally Posted by nohan

if u find a solution pls post

So far, with my specs I can't play well. 6~8 fps in fixed.

I think it's time to upgrade my pc :P

I'm working on it.

02-23-2010, 06:23 PM	#1
imefisto_foro Initiate Join Date: Aug 2008 Location: San Luis - Argentina Posts: 213	NT and Intel Hi all. I'm having problems to play and maybe it's about my system and/or specs (I'm getting 7/9fps in fixed mode): Genuine Intel(R) CPU T2080 @ 1.73GHz (Duo) 1GB Ram Video: Intel 945 Who plays Regnum with Intel in Linux? Which versions of kernel, xorg, intel driver and mesa are you using? Thanks in advance! __________________ Inek Bárbaro en desarrollo. Sólo sangre azul. Sombras de Alsius (todavía me queda grande el cartelito) Hasta siempre Feo...G*

02-25-2010, 09:58 PM	#2
Myxir Count Join Date: Mar 2007 Location: Germany Posts: 1,164	The ng3d update improved the performance by giving more load to GPU than before. That means for users with a weaker graphic card the update decreased the game performance. Especially the Intel chips were hurt by this. There is an option hardware skinning that allows to pass a bit of load between GPU and CPU. But i don't know in which state it gives load to CPU. You might try that. Fixed pipeline and minimum settings is all you can do, I think :/ __________________ French Warriors of Syrtis: Nessa Telrunya (Hunter) - Myxir (Warlock) - Estra (Conjurer) In War it does not matter who is right, but who is left.

04-09-2010, 09:15 PM	#4
Evangeline Master Join Date: Aug 2008 Location: Wonderland Posts: 308	if u find a solution pls post