[Amun] - Open for everyone! - Page 9

Loque · 07-04-2012, 01:29 PM

Amun is not loading for me at the moment. On the final loading screen after character selection, the game sits at 60% of the loading bar.

It was working fine two days back.

Log : http://i.imgur.com/3lNVG.jpg

Pwnography · 07-04-2012, 01:48 PM

Quote:

Originally Posted by Irsh

Amun is not loading for me at the moment. On the final loading screen after character selection, the game sits at 60% of the loading bar.

It was working fine two days back.

Log : http://i.imgur.com/3lNVG.jpg

I get this too.

Lexi15 · 07-04-2012, 02:19 PM

Since yesterday night (10pm (German time)) it isn´t loading.

Now it works!!

standistortion · 07-04-2012, 02:53 PM

Try deleting test.cfg and adding settings 1 by 1 and restarting, I was getting the same but couldn't track it down. Can't reproduce this any more so maybe its some internal housekeeping type stuff that's taking a long time the first few runs (something like this mentioned in a post of Frosk's). It still sometimes hangs for a few seconds at about 60-70% but doesn't freeze totally anymore here.

EDIT: Not much changed with this version here, loading seems to be very slightly quicker, loading after character selection seems smoother and FXAA seems less blurred otherwise same problems as earlier post. Didn't mention in earlier post, water looks wrong with any settings, looks like light and dark random patches on a flat surface.

Loque · 07-04-2012, 06:41 PM

Quote:

Originally Posted by Irsh

Amun is not loading for me at the moment. On the final loading screen after character selection, the game sits at 60% of the loading bar.

It was working fine two days back.

Log : http://i.imgur.com/3lNVG.jpg

I got a 16mb update and it's fine now.

trulyem · 07-05-2012, 03:38 AM

Quote:

Originally Posted by Frosk

"Ultra" setting mode is intended for those who have "uber pc's", meanwhile the "very high" graphic setting is much more similar to what Shader Model 4.0 was.

As for Amun, it has been down and it didn't seem to respond. Today on the office we'll make it come back again from the dead so don't worry.

Regards!

Well after AMUN being down, I checked it again and I was able to get 75 fps for Ultra Settings. Its a great improvement from before. Hope you can enhance it better

On a side note, does the hard drive affect the game play performance in regnum? I currently have 50gbs left on my HD.

---------------------------------------------------
Processor: I5 2500k
Video Card: AMD 5670 1GB DDR3
RAM: 8gb DDR3

surak · 07-05-2012, 03:56 AM

Quote:

Originally Posted by trulyem

On a side note, does the hard drive affect the game play performance in regnum? I currently have 50gbs left on my HD.

It shouldn't. Unless magic is real (?)

Lekarz · 07-05-2012, 08:08 AM

I think there would be differences between SSD , HDD 7200 rpm and HDD 5400 rpm even ingame ;]

Same with hard drive with high fragmentation ratio.
And it's not magic anymore ¯\(ツ)/¯

standistortion · 07-05-2012, 08:51 AM

Still getting C012 on change settings restart.
Lot of options greyed out, will delete test.cfg and start again.

With 'low' settings.
Drought hits RO, all the water is gone, we're all going to die!! Mont fountain has snowcrashed too, the surfaze is a changing fuzz of black and white pixels like a tv with no signal.
Alt+return working correctly.
Character face beside health/mana bars working.
Ingame character window a miniature version of the full screen.
screenshot 2012-07-05 09_46_33-1.jpg

With 'Medium' settings:
Water visible with same flat and patchy quality as before.
Alt+return gives a black screen, restart needed.
Character face beside health/mana bars not working.
Ingame character window a miniature version of the full screen with only the character visible and semi transparent.

With 'High' settings:
Ingame character window correct size, still semi transparent.

With 'Very high' settings:
Screen freezes (menu still works), assuming due to bloom.

All settings to maximum except render quality and bloom working ok with 25-50 fps, 20-35 with live client.

32 seconds from clicking 'enter game world' to start of splash.
'Advanced' button on graphics settings should maybe change to 'Basic' to go back.
'Restart needed for changes' popup still comes up when clicking 'Apply' even if the settings needing a restart are changed back, need to exit settings window and re-open.
No 'lock spellbar' option.

Will stay with the outdated ubuntu 10.04 standard repository nvidia drivers for now unless asked to update, can change distro if needed, due an update anyway.

After a few restarts had an error immediately when starting the launcher, game process was still running in background, had to kill manually.

Code:

X Error of failed request:  GLXBadDrawable
  Major opcode of failed request:  135 (GLX)
  Minor opcode of failed request:  5 (X_GLXMakeCurrent)
  Serial number of failed request:  30
  Current serial number in output stream:  30

Stuck with 'user already logged in' atm. Character is in game and in the same position. Brought up settings and set vsync and anisotropic filter to max, restart needed popup came up on apply, sometime when switching between advanced and basic graphics settings screens and moving the anisotropic filter settings could click apply with no popup. Anisotropic filter was on minimum (as it was when started changing settings), moved anisotropic filter to max and clicked apply, got restart popup and clicked accept, 'user already logged in' after this. Logged in again now, guessing that session timed out.

Lamai armour is only visible within about 50 meters, have the same issue on the live client.

Shwish · 07-05-2012, 11:37 AM

Quote:

Originally Posted by surak

It shouldn't. Unless magic is real (?)

"Magic is just science that we don't understand yet"

07-04-2012, 02:19 PM	#83
Lexi15 Pledge Join Date: Jan 2012 Location: Germany Posts: 29	Since yesterday night (10pm (German time)) it isn´t loading. Now it works!! __________________ Regnum Online-The best game in the world! Last edited by Lexi15; 07-04-2012 at 02:42 PM.

07-04-2012, 02:53 PM	#84
standistortion Master Join Date: May 2010 Location: Ireland Posts: 438	Try deleting test.cfg and adding settings 1 by 1 and restarting, I was getting the same but couldn't track it down. Can't reproduce this any more so maybe its some internal housekeeping type stuff that's taking a long time the first few runs (something like this mentioned in a post of Frosk's). It still sometimes hangs for a few seconds at about 60-70% but doesn't freeze totally anymore here. EDIT: Not much changed with this version here, loading seems to be very slightly quicker, loading after character selection seems smoother and FXAA seems less blurred otherwise same problems as earlier post. Didn't mention in earlier post, water looks wrong with any settings, looks like light and dark random patches on a flat surface. Last edited by standistortion; 07-04-2012 at 06:59 PM. Reason: No point making a new post.

07-05-2012, 08:08 AM	#88
Lekarz Master Join Date: Jul 2010 Location: Poland Posts: 285	I think there would be differences between SSD , HDD 7200 rpm and HDD 5400 rpm even ingame ;] Same with hard drive with high fragmentation ratio. And it's not magic anymore ¯\(ツ)/¯ __________________ Φ Operation Repo Φ AssSavior Last edited by Lekarz; 07-05-2012 at 08:22 AM.

07-05-2012, 08:51 AM	#89
standistortion Master Join Date: May 2010 Location: Ireland Posts: 438	Still getting C012 on change settings restart. Lot of options greyed out, will delete test.cfg and start again. With 'low' settings. Drought hits RO, all the water is gone, we're all going to die!! Mont fountain has snowcrashed too, the surfaze is a changing fuzz of black and white pixels like a tv with no signal. Alt+return working correctly. Character face beside health/mana bars working. Ingame character window a miniature version of the full screen. screenshot 2012-07-05 09_46_33-1.jpg With 'Medium' settings: Water visible with same flat and patchy quality as before. Alt+return gives a black screen, restart needed. Character face beside health/mana bars not working. Ingame character window a miniature version of the full screen with only the character visible and semi transparent. With 'High' settings: Ingame character window correct size, still semi transparent. With 'Very high' settings: Screen freezes (menu still works), assuming due to bloom. All settings to maximum except render quality and bloom working ok with 25-50 fps, 20-35 with live client. 32 seconds from clicking 'enter game world' to start of splash. 'Advanced' button on graphics settings should maybe change to 'Basic' to go back. 'Restart needed for changes' popup still comes up when clicking 'Apply' even if the settings needing a restart are changed back, need to exit settings window and re-open. No 'lock spellbar' option. Will stay with the outdated ubuntu 10.04 standard repository nvidia drivers for now unless asked to update, can change distro if needed, due an update anyway. After a few restarts had an error immediately when starting the launcher, game process was still running in background, had to kill manually. Code: X Error of failed request: GLXBadDrawable Major opcode of failed request: 135 (GLX) Minor opcode of failed request: 5 (X_GLXMakeCurrent) Serial number of failed request: 30 Current serial number in output stream: 30 Stuck with 'user already logged in' atm. Character is in game and in the same position. Brought up settings and set vsync and anisotropic filter to max, restart needed popup came up on apply, sometime when switching between advanced and basic graphics settings screens and moving the anisotropic filter settings could click apply with no popup. Anisotropic filter was on minimum (as it was when started changing settings), moved anisotropic filter to max and clicked apply, got restart popup and clicked accept, 'user already logged in' after this. Logged in again now, guessing that session timed out. Lamai armour is only visible within about 50 meters, have the same issue on the live client. Last edited by standistortion; 07-05-2012 at 03:28 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-04-2012, 01:29 PM	#81
Loque Master Join Date: Jun 2011 Posts: 347	Amun is not loading for me at the moment. On the final loading screen after character selection, the game sits at 60% of the loading bar. It was working fine two days back. Log : http://i.imgur.com/3lNVG.jpg