Ati Radeon 9200SE Not supported

Lashu · 07-31-2007, 09:27 AM

On gentoo, i can't run Regnum client, probably graphic card ati radeon 9200SE is not supported. Could you fix it ?

Wyatt · 07-31-2007, 09:30 AM

is your graphic card up to date?

Lashu · 07-31-2007, 08:47 PM

Ok i know now why i think, for this card Ati have drivers only for old kernel :/ I have only drivers from Xorg for this card, any ideas ?

arlick · 07-31-2007, 09:54 PM

what exactly the problem that u cant run the game?

whats the output of this?:

$ glxinfo | grep version

i remember that the minimum version is 1.2 or 1.5.

but my memory is really bad... the alcohol is bad...

DuoMaxwell · 07-31-2007, 10:15 PM

the 9200 is unsupported by ati these days and If I remember the 9250 and under cards should have full 3d support in the x.org standard driver(tho I could be wrong) just as intel's IGPs are fully supported under it. This doesn't make the 9200 all that great a card tho as it wasn't all that great a card when it was current and these days it's very out of date.

So give it a shot with the lowest settings in regnum and try other games like Warsow and unreal tournament 2k3 or 2k4 with the FPS counter running and see what you get with the standard x.org driver compared with the final release of the ati binary blob driver.

Lashu · 08-01-2007, 09:12 PM

I have:

Server glx version string: 1.2
Client glx version string: 1.4
Glx version: 1.2
OpenGL version string: 1.3 Mesa 6.5.3

It write that this graphic card is not supported :| ;/

leptom · 08-23-2007, 10:46 AM

I use this graphic card with ubuntu and Mesa 7.0 and run very smooth.
Try to install mesa 3d 7.0.1 (latest release).
Follow theses steps: http://ubuntuforums.org/showthread.p...highlight=mesa

Regards!

mad93 · 01-29-2008, 09:08 PM

I've the 9200SE with xorg driver (3D enabled) and have installed mesa-7.0.2 and the problem persist. Is there any way to avoid the verification of the GPU?

07-31-2007, 09:27 AM	#1
Lashu Pledge Join Date: Feb 2007 Posts: 30	Ati Radeon 9200SE Not supported On gentoo, i can't run Regnum client, probably graphic card ati radeon 9200SE is not supported. Could you fix it ?

07-31-2007, 09:54 PM	#4
arlick Duke Join Date: Jan 2007 Posts: 3,939	what exactly the problem that u cant run the game? whats the output of this?: $ glxinfo \| grep version i remember that the minimum version is 1.2 or 1.5. but my memory is really bad... the alcohol is bad... __________________ "Nunca un científico ha quemado a un religioso por afirmar a Dios sin pruebas". Manuel Toharia "uno empieza a darse cuenta que eso de no hacer ejercicio, comer y beber como si fuese la ultima cena y mantener la figura ya no existe...". Maryan

07-31-2007, 10:15 PM	#5
DuoMaxwell Master Join Date: Jun 2007 Location: A place worse then hell Posts: 332	the 9200 is unsupported by ati these days and If I remember the 9250 and under cards should have full 3d support in the x.org standard driver(tho I could be wrong) just as intel's IGPs are fully supported under it. This doesn't make the 9200 all that great a card tho as it wasn't all that great a card when it was current and these days it's very out of date. So give it a shot with the lowest settings in regnum and try other games like Warsow and unreal tournament 2k3 or 2k4 with the FPS counter running and see what you get with the standard x.org driver compared with the final release of the ati binary blob driver. __________________ My Chars: Duo Maxwell, Knight, Ignis. Yo Momma, Conjurer, Ignis. Izana, Hunter, Ignis Bank Of Duo, Warrior, used as gear storage only cause we have no banks...

07-31-2007, 09:30 AM	#2
Wyatt Count Join Date: Dec 2006 Posts: 1,544	is your graphic card up to date?

07-31-2007, 08:47 PM	#3
Lashu Pledge Join Date: Feb 2007 Posts: 30	Ok i know now why i think, for this card Ati have drivers only for old kernel :/ I have only drivers from Xorg for this card, any ideas ?

08-01-2007, 09:12 PM	#6
Lashu Pledge Join Date: Feb 2007 Posts: 30	I have: Server glx version string: 1.2 Client glx version string: 1.4 Glx version: 1.2 OpenGL version string: 1.3 Mesa 6.5.3 It write that this graphic card is not supported :\| ;/

08-23-2007, 10:46 AM	#7
leptom Initiate Join Date: Dec 2006 Posts: 124	I use this graphic card with ubuntu and Mesa 7.0 and run very smooth. Try to install mesa 3d 7.0.1 (latest release). Follow theses steps: http://ubuntuforums.org/showthread.p...highlight=mesa Regards!

01-29-2008, 09:08 PM	#8
mad93 Pledge Join Date: Jan 2008 Posts: 2	I've the 9200SE with xorg driver (3D enabled) and have installed mesa-7.0.2 and the problem persist. Is there any way to avoid the verification of the GPU?