06-10-2009, 06:46 PM
|
#1071 | |
|
Marquis
 
Join Date: Oct 2006
Location: no se pudo establecar conexión con el servidor
Posts: 2,057
 |
Quote:
1. yo prefiero debian  2. también prefiero que cada sistema operativo tenga su propia partición, para trastear tranquilo
__________________
in theCopyleft—all rights reversed |
|
|
|
|
06-11-2009, 03:40 PM
|
#1072 |
|
Marquis
Join Date: Oct 2006
Location: no se pudo establecar conexión con el servidor
Posts: 2,057
|
che
Code:
smartctl -a /dev/sda
smartctl version 5.38 [i486-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Second Generation Serial ATA family
Device Model: WDC WD1600AAJS-00PSA0
Serial Number: WD-WMAP92324269
Firmware Version: 05.06H05
User Capacity: 160,041,885,696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Jun 11 12:37:43 2009 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 121) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: (4200) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 56) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 192 168 051 Pre-fail Always - 22362
3 Spin_Up_Time 0x0003 156 153 021 Pre-fail Always - 3200
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 300
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000e 200 200 051 Old_age Always - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1432
10 Spin_Retry_Count 0x0012 100 100 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 295
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 85
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 300
194 Temperature_Celsius 0x0022 107 103 000 Old_age Always - 36
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 179 000 Old_age Always - 25
198 Offline_Uncorrectable 0x0010 200 183 000 Old_age Offline - 22
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 5
200 Multi_Zone_Error_Rate 0x0008 198 171 051 Old_age Offline - 165
SMART Error Log Version: 1
ATA Error Count: 15122 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 15122 occurred at disk power-on lifetime: 1430 hours (59 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 c1 b0 15 e0 Error: UNC 128 sectors at LBA = 0x0015b0c1 = 1421505
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 c1 b0 15 04 00 01:49:18.465 READ DMA EXT
35 00 80 a7 cd f3 02 00 01:49:18.464 WRITE DMA EXT
35 00 80 27 cd f3 02 00 01:49:18.464 WRITE DMA EXT
35 00 80 a7 cc f3 02 00 01:49:18.463 WRITE DMA EXT
35 00 80 27 cc f3 02 00 01:49:18.462 WRITE DMA EXT
Error 15121 occurred at disk power-on lifetime: 1430 hours (59 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 c1 b0 15 e0 Error: UNC 128 sectors at LBA = 0x0015b0c1 = 1421505
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 c1 b0 15 04 00 01:49:15.478 READ DMA EXT
35 00 80 a7 c3 f3 02 00 01:49:15.477 WRITE DMA EXT
35 00 80 27 c3 f3 02 00 01:49:15.477 WRITE DMA EXT
35 00 80 a7 c2 f3 02 00 01:49:15.476 WRITE DMA EXT
35 00 80 27 c2 f3 02 00 01:49:15.474 WRITE DMA EXT
Error 15120 occurred at disk power-on lifetime: 1430 hours (59 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 c1 b0 15 e0 Error: UNC 128 sectors at LBA = 0x0015b0c1 = 1421505
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 c1 b0 15 04 00 01:49:12.653 READ DMA EXT
35 00 80 a7 bc f3 02 00 01:49:12.653 WRITE DMA EXT
35 00 80 27 bc f3 02 00 01:49:12.651 WRITE DMA EXT
35 00 80 a7 bb f3 02 00 01:49:12.650 WRITE DMA EXT
35 00 80 27 bb f3 02 00 01:49:12.650 WRITE DMA EXT
Error 15119 occurred at disk power-on lifetime: 1430 hours (59 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 c1 b0 15 e0 Error: UNC 128 sectors at LBA = 0x0015b0c1 = 1421505
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 c1 b0 15 04 00 01:49:09.824 READ DMA EXT
35 00 80 a7 b2 f3 02 00 01:49:09.823 WRITE DMA EXT
35 00 80 27 b2 f3 02 00 01:49:09.822 WRITE DMA EXT
35 00 80 a7 b1 f3 02 00 01:49:09.822 WRITE DMA EXT
35 00 80 27 b1 f3 02 00 01:49:09.821 WRITE DMA EXT
Error 15118 occurred at disk power-on lifetime: 1430 hours (59 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 80 c1 b0 15 e0 Error: UNC 128 sectors at LBA = 0x0015b0c1 = 1421505
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 80 c1 b0 15 04 00 01:49:02.854 READ DMA EXT
35 00 08 ff 80 c2 02 00 01:49:02.853 WRITE DMA EXT
25 00 08 6f 4c b7 02 00 01:49:02.837 READ DMA EXT
35 00 80 b7 cb 4b 02 00 01:49:02.836 WRITE DMA EXT
35 00 80 37 cb 4b 02 00 01:49:02.836 WRITE DMA EXT
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed: read failure 90% 1431 30993
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
__________________
in theCopyleft—all rights reversed |
|
|
|
|
06-11-2009, 08:30 PM
|
#1073 | |
|
Baron
 
Join Date: Jan 2008
Location: Skolheim
Posts: 754
|
Quote:
__________________
Bern: conjurador - Tabanito: cazadora
Adan Buenosayres: brujo - Pepe Cortisona: bárbaro honeste vivere - suum cuique tribuere - alterum non laedere |
|
|
|
|
|
06-11-2009, 08:34 PM
|
#1074 | |
|
Marquis
Join Date: Oct 2006
Location: no se pudo establecar conexión con el servidor
Posts: 2,057
|
Quote:
Code:
sudo ifconfig sudo route -n sudo cat /etc/resolv.conf sudo whereis knetworkmanager
__________________
in theCopyleft—all rights reversed |
|
|
|
|
|
06-11-2009, 08:43 PM
|
#1075 | |
|
Duke
Join Date: Nov 2006
Location: 0x00CAFE
Posts: 3,366
|
Quote:
__________________
I don't have a solution, but I admire the problem. |
|
|
|
|
|
06-11-2009, 11:28 PM
|
#1076 | |
|
Baron
Join Date: Jan 2008
Location: Skolheim
Posts: 754
|
Quote:
To run a command as administrator (user "root"), use "sudo <command>". See "man sudo_root" for details. bern@ubuntu:~$ sudo ifconfig [sudo] password for bern: eth0 Link encap:Ethernet direcciónHW 00:17:31:a3:2b:28 inet dirección:192.168.1.2 Difusión:192.168.1.255 Máscara:255.255.255.0 dirección inet6: fe80::217:31ff:fea3:2b28/64 Alcance:Vínculo ARRIBA DIFUSIÓN CORRIENDO MULTICAST MTU:1500 Métrica:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:54 errors:0 dropped:0 overruns:0 carrier:0 colisiones:0 txqueuelen:1000 RX bytes:1044 (1.0 KB) TX bytes:6628 (6.6 KB) Interrupción:21 Dirección base: 0x6000 lo Link encap:Bucle local inet dirección:127.0.0.1 Máscara:255.0.0.0 dirección inet6: ::1/128 Alcance:Anfitrión ARRIBA LOOPBACK CORRIENDO MTU:16436 Métrica:1 RX packets:22 errors:0 dropped:0 overruns:0 frame:0 TX packets:22 errors:0 dropped:0 overruns:0 carrier:0 colisiones:0 txqueuelen:0 RX bytes:1140 (1.1 KB) TX bytes:1140 (1.1 KB) bern@ubuntu:~$ sudo route -n Tabla de rutas IP del núcleo Destino Pasarela Genmask Indic Métric Ref Uso Interfaz 192.168.1.0 0.0.0.0 255.255.255.0 U 1 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 bern@ubuntu:~$ sudo cat /etc/resolv.conf # Generated by NetworkManager domain local.lan search local.lan nameserver 192.168.1.1 bern@ubuntu:~$ sudo whereis knetworkmanager knetworkmanager: bern@ubuntu:~$ lalala..
__________________
Bern: conjurador - Tabanito: cazadora
Adan Buenosayres: brujo - Pepe Cortisona: bárbaro honeste vivere - suum cuique tribuere - alterum non laedere |
|
|
|
|
|
06-11-2009, 11:35 PM
|
#1077 |
|
Marquis
Join Date: Oct 2006
Location: no se pudo establecar conexión con el servidor
Posts: 2,057
|
en principio, tenés en orden las cosas:
ip: 192.168.1.2 ruta por defecto: 192.168.1.1 dns: 192.168.1.1 esa información la podés chequear con lo que tengas en win. Pero... pero veo que tenés instalado el networkmanager. A mi esa basura siempre me trajo un problema para cada solución que yo encontraba, había un applet que yo siempre tenía que encender y apagar para que funcione la red, entonces encontré una solución mejor: sudo apt-get --purge remove network-manager El siguiente paso es configurar manualmente la red, tenés que tener algo como esto: /etc/network/interfaces <--- ese archivo se cambia como root Code:
auto eth0 lo iface eth0 inet dhcp
__________________
in theCopyleft—all rights reversed |
|
|
|
|
06-12-2009, 12:59 AM
|
#1078 | |
|
Baron
Join Date: Jan 2008
Location: Skolheim
Posts: 754
|
Quote:
__________________
Bern: conjurador - Tabanito: cazadora
Adan Buenosayres: brujo - Pepe Cortisona: bárbaro honeste vivere - suum cuique tribuere - alterum non laedere |
|
|
|
|
|
06-12-2009, 01:37 AM
|
#1079 |
|
Marquis
Join Date: Oct 2006
Location: no se pudo establecar conexión con el servidor
Posts: 2,057
|
editás como root ese archivo que te dije y te fijás que ponga algo parecido a esas dos líneas. O copiá aquí el contenido de ese archivo y te decimos como dejarlo
__________________
in theCopyleft—all rights reversed |
|
|
|
|
06-12-2009, 04:20 PM
|
#1080 | |
|
Baron
Join Date: Jan 2008
Location: Skolheim
Posts: 754
|
Quote:
Es que no me deja. bern@ubuntu:~$ su Contraseña: root@ubuntu:/home/bern# /etc/network/interfaces bash: /etc/network/interfaces: Permiso denegado root@ubuntu:/home/bern# exit exit bern@ubuntu:~$
__________________
Bern: conjurador - Tabanito: cazadora
Adan Buenosayres: brujo - Pepe Cortisona: bárbaro honeste vivere - suum cuique tribuere - alterum non laedere |
|
|
|
|
 |
| Tags |
| ayuda, linux |
|
|
Linear Mode
