Trainer 1.6.2 and 1.6.3

[Anpu]

Link: http://trainer.claninquisition.org/

In short: this trainer will be part of RO Tools v2 we (INQ) are developing for some time. It is not finished completely and there will be a bit more work on it. But for current situation, it can be useful and do its job properly. All spell descriptions and icons are updated with the latest 1.6.3 live version.

Some of the features:
-unique link of saved setup
It means once you set your setup and press Save button, you will get unique setup's link in your browser's address bar. It is easier way for sharing setups with other players.

-copy someone's setup and change it to customize your needs
Many times you see some interesting setup, but in your opinion, you would change few spell levels. No problem. Visit link of setup you like, click "Copy setup" button and edit it in the way you like. Press "Save" button, and you will get unique link of that changed setup. In case you do not make any changes, but you hit "Save", no new link will be generated.

-comments
Comment system is added, so you can discuss about setup, spell combos used in it etc. OpenID is enabled too.

-1.6.2. version available too
In case you want to compare your setup in previous version and new one..

Any new updates/improvements will be addressed here. Note that trainer is in development phase still (along with the rest of tools) so if you notice/experience any errors/problems, or you have a suggestion, please post here or use "Contact us" (http://www.claninquisition.org/index.php?action=contact) section.

Enjoy!

[Mattdoesrock]

Works like a charm. Kudos to INQ and its creator!

Thanks!

[ice_zero_cool]

Good work INQ guys and girls! It's wonderful

[time-to-die]

realy nice!

[doppelapfel]

Nice thank you.

[Punti_X]

Great, Anpu!

[-Drv-]

great job PT :hat:

[Gytha_Ogg]

Very nice, thanks INQ!

[UmarilsStillHere]

Glad to have helped out, and its worked out great ^^

First one Ive seen where every +/- dosn't have a second or 2 of lag attached.

[Anpu]

Thanks all!

We fixed a couple of spell descriptions and values, added few missing ones, so please Refresh page (F5) or maybe even clear cache in case it still shows some old values.
(hunter, mage, warrior, knight affected with change)

[m1ne]

Thanks!:wiggle14:

[doppelapfel]

Could you make the window you see when you move the mouse on a spell always appearing above all spells of the 4 last skilllines? If i move my mouse on ao1 for example half of the description is cut by the screen edge and i cant scroll down before the description appears.

[Punti_X]

Small error noticed, description for knight - defensive and offensive stance have same text in start of description.

[Pnarpa]

Thank you. :)

[doppelapfel]

1.6.3 doesnt work atm. :/

[Miraculix]

Yes, we're working on it, it will be back soon. Sorry for the inconvenience :)

[Anpu]

Sorry, yesterday's patch had a little error, it is fixed now. Also Escapist and Offensive stance descriptions corrected.

Could you make the window you see when you move the mouse on a spell always appearing above all spells of the 4 last skilllines? If i move my mouse on ao1 for example half of the description is cut by the screen edge and i cant scroll down before the description appears.
Yes, one more player reported this. We might add soon option pin/unpin (which previous version of trainer had) where you will be able to move spell description(s) around.

[mariqri]

i posted chucky's setup
please try it before commenting
its an awesome setup almost nobody escapes
http://trainer.claninquisition.org/trainer.html?s=bcZmddaaaqeCaeabaaaaasekzaguGgaahua fbLf

[doppelapfel]

Sorry, yesterday's patch had a little error, it is fixed now. Also Escapist and Offensive stance descriptions corrected.


Yes, one more player reported this. We might add soon option pin/unpin (which previous version of trainer had) where you will be able to move spell description(s) around.
You could fix this by allowing users to scroll down so far that they also see the description of the last spells. Atm the scroll bar only appears if you move the mouse on a spell, if you try to scroll down then you move the mouse away from the spell and everything scrolls up again.

[Mattdoesrock]

It would be nice if there was a toggle button, to see the spell discriptions or not.

[Anpu]

You could fix this by allowing users to scroll down so far that they also see the description of the last spells. Atm the scroll bar only appears if you move the mouse on a spell, if you try to scroll down then you move the mouse away from the spell and everything scrolls up again.

Yeah good idea too. We will take a look into this as soon as possible.

It would be nice if there was a toggle button, to see the spell discriptions or not.
Aww descriptions are THAT annoying? :P Added to suggestions. ;)

Edit:
trainer update:
-on mouse over spell, it shows only its name
-left click on spell open description
-on description window, added on top right "Close" button
-spell description can be moved around
-opening 2nd spell description closes 1st one opened

[Mattdoesrock]

Aww descriptions are THAT annoying? :P Added to suggestions. ;)

No no, not annoying. I just thought it might be a nice feature. For those who don't need to see them; who might just be recreating their build to show someone, instead of working one out, for example.

[Miraculix]

The problem with showing scrollbars when the description appears is that it makes everything move a bit to the left to make room for the scrollbar, and when you move your mouse over the last trees you get constant descriptions on and off, which means the whole thing moves left-right-left-right... That's why there were no scrollbars :p

[Anpu]

Try out new version (changelog in my previous post added) and post if it fixed a problem.
One Refresh (F5) would be enough.

[Mattdoesrock]

Nice! The clicking the spell for its description feature is very nice.

However one little thing, when you put point's / take out point's using the arrows, it also opens and closes the description.

[Anpu]

Nice! The clicking the spell for its description feature is very nice.

However one little thing, when you put point's / take out point's using the arrows, it also opens and closes the description.

Ooops! Fixed.

[doppelapfel]

Nice! Works fine now. :smile:

[kidanger]

Very nice tool :horsey:

Could you add the name of the spell in top of the description window ?


Thanks for this nice trainer :)

[Anpu]

Updated to 1.6.4 changes, fixed cd of SotW and mana cost of Shield Wall.
Empty cache to see changes.

[Anpu]

All (hopefully) typos in marksman's and hunter's spell descriptions have been fixed, Camouflage and Enemy surveillance corrected too.

To see changes, it requires clearing your cache.

These days we will conduct checks on remaining four classes and its spell descriptions.

[Anpu]

Could you add the name of the spell in top of the description window ?


Done!

Also, fixed all typos and spell descriptions for warriors and mages. Now all spell descriptions should be set. Clear your cache, please.

[Anpu]

We corrected many spell descriptions that had wrong values (thanks a lot to Erika for pointing them out!). Please clear the cache to see fresh data.
Ty.

[Inkster]

Ive only just had the time to check everything and so far ive not found any errors

[Anpu]

It seems that NGD changed (a little) power points for mages than it was known. We uploaded a fix (a couple of days ago, so affected levels of mages will have additional free points) for levels (in Trainer (trainer.claninquisition.org)) we discovered together with Erika (talk on Wikia (http://regnum.wikia.com/wiki/User_talk:Anpuu#Power_Points)).
We didn't confirm power points for following mage levels:
11, 37, 38, 41, 42, 43, 45, 46, 47, 48, 49.
In case you have character class MAGE (Conjurer, Warlock) and would like to help, please check amount of power points in ingame trainer (please don't check on other trainer applications, just in game).
Once we get confirmation on all mage levels, Trainer and Wikia page will be updated with all correct data.

Thanks in advance!

[Anpu]

INQ updated trainer to version 1.7.0. You can now make level 60 setups and save them.
Note that there is a mark "DEV" next to 1.7.0 version. It means we found some issues and work on them. So trainer is in usable state, just we need to fix some problems before we mark it as pure stable.

Important notice is that we will now focus on Trainer's performance, enhancing and adding requested feats.

[Anpu]

After some time, we ll give some love to the trainer again. :wub2:

I prepared patch for updating spells (which you already know) and I m happy to say that we ll start working on adding WM tree (and maybe a few handy stuff too depends on time and progress).

Patch with spells will be sent to the live version as soon as we finish trainer migration to another place (I expect to be completed these days).

I will notify here when transfer and patch is done.

[mavrick13927]

Anpu, I have to say thanks to you and all in your clan who work on this. I use the trainer and the other tools often. Thanks for sharing.

[Anpu]

Thank you very much!

As I promised, trainer spells are updated and online now. Transfer is complete, now we just need to wait a couple of hours (should be 2 hours max) till records about domain sync.

Because of that, if you go to http://trainer.claninquisition.org , some of you might see old trainer (1.7.0(DEV)). Till things settle up in a few hours (described above), you can access updated trainer (1.8.0) via http://www.trainer.claninquisition.org

You can normally access to your existing setups with old link or with new temporary one (with "www").

I need to check few more spells just to be sure all is correct. Till then, if any issues or errors in spells or trainer you find, feel free to post here or pm. Just a small notice, we are aware of problem trainer being slow in IE. It s on TODO still. WM tree will be next update.

Many thanks to, -Mongoose-, Rathaloz, Alatar, Deadanimalwoman, Cartos and other clannies as well as to LemonEntry (https://www.lemonentry.eu/) too.

[Anpu]

Just a quick fix for warrior spells data and Stunning fist.
Thanks to -Mongoose-, Rathaloz and Detalhez
One CTRL + F5 should be enough to display updated spells.

[_Enio_]

Edit: nvm im blind.

Looking forward to WM tree :)

[Valkasar]

anpu, did i ever mentioned how much i love you and your clan? xD i use the tools A LOT

[Anpu]

Thanks. :)

Trainer updated with 1.9.3 changes. All you need to do is press CTRL + F5 (or clear cache).
Any probs with it, pls post here or on PM.

I know I promised WM tree but due to RL, it was delayed. I will keep the promise and start working on it next week (if all goes well).

[Anpu]

Trainer received new option: short URL. Once you save setup, short URL should be displayed in bottom left corner, like on picture below:

http://www.dodaj.rs/f/I/r9/3dqCUpK2/link.png

Any problems using it, please do report here or on PM.
In case you do not see change, press CTRL + F5 (that should be enough).
If it doesn't work, clear cache.

Tested in Firefox 12, Chromium Version 21.0.1145.0 (svn138062), Google Chrome 19 and Opera 11.64. It isnt tested in any IE (nor Safari) as I don't have one so feedback is welcome. Just do not report problems on IE 6, as it is officially a dead browser (http://www.ie6countdown.com/).

[Awrath]

Didn't think the trainer could get any better, but it did \o/. Thanks Anpu!

Works fine on Firefox 13. I'll boot into Windows sometime after work on Sunday and test on IE if no one has yet by then.

[Anpu]

Thanks Awra. :)

Trainer updated with 1.9.6 changes. Also broken layout in Chrome / Chromium should be now fixed.
Since the short url feature was introduced, 14.1k links were generated. :)

[Tamui]

Thanks Awra. :)

Trainer updated with 1.9.6 changes. Also broken layout in Chrome / Chromium should be now fixed.
Since the short url feature was introduced, 14.1k links were generated. :)

It's fixed for me! thanks! :):thumb: